![]() ![]() Take any 3/4" coupler and saw off about half an inch from one of the ends, then slide that piece about half way across the 3/4" pvc sectionĪt the other end of the 3/4" pvc you should glue on a rubber cap, mine was a little fancier than most rubber caps which is good. insert a 90 degree coupler on the left side, and glue it into place 7.8 Publisher: Sony Computer Entertainment America LLC Developer: Sucker Punch Productions LLC Magnet Game description inFAMOUS: Festival of Blood is an entry the series released after inFAMOUS 2, but separate from the series canon. insert these sections into the remaining openings of the 4 way coupler cut 3 sections of 3/4" pvc about 1" per section dremel out the insides of the spigots so the 1/2" pvc fits nice and snugly inside Then you need to cut the 3/4" pvc to be 15"Īdd a 4-WAY COUPLER at the end of the 3/4" pvcĪfterwards you are going to need 2 3/4" 90 degree couplers with spigots ![]() First off you're going to want to cut two equal sections of 1/2" pvc at about 18" long ![]()
0 Comments
Leave a Reply. |